Sponsored in part by...
Visit my Facebook
chopperaddict , R/C, helicopter ,
trex , interceptor , int400 , blade 400 ,
training , repairs , setups , sales ,
information , tips & tricks , help
custom builds , scale builds ,
spare parts , tutorials , info ,
align , t-rex , kds , copterx ,
copter-x , alien command ,
Helicommand , Flymentor ,
auto pilot systems , radio setup ,
kit building , Upgrades ,
hover training , setup training ,
Flight training , Phoenix training ,
HeliArtist , painting , detailing ,
Tips & Tricks
tip applies only to the Spektrum DX6i transmitter !!!
people ask this question - Can you switch the operating mode of a DX6i
from Mode 1 to mode 2 and vice versa.
answer is a resounding YES, BUT it takes some time and it is quite
fiddly to do as you have to physically switch the two stick assemblies
do the impossible bit is however quite easy, and that is telling the Tx
to switch modes internally (electronically) This is made possible
by a very well hidden menu option as described below.
Turn your radio on.
2 Go into the SETUP menu
3 Select the COPY/RESET option
4 Select the RESET option on that menu, do not press the roller to
select this option
5 When you are asked if you are sure ? select the LIST option
6 Toggle the Aileron D/R at the top right of the radio several times
7 The screen should change to a new display showing the current mode of
8 Select the mode field and use the scroll bar in the normal way to
select the opposite mode.
9 Press the select button to save the new mode.
10 Check out the sticks and see that the new mode is operating
you have to do the physical swapping around of the gimbals by stripping
the radio down.
than repeat it all here, I recommend that you go to THIS
LINK SITE and then read the instructions VERY carefully, and
probably print them out as well
luck with it...